Log Units Research Articles

[Quantitative comparison of binocular suppression of patients with anisometropic amblyopia and ametropic amblyopia].

Objective: To explore the differences in clinical characteristics and interocular interactions between patients with anisometropic amblyopia and ametropic amblyopia. Methods: Cross-sectional study. The newly diagnosed anisometropic (the binocular difference in spherical equivalent≥1.00 D) amblyopia patients and ametropic amblyopia patients (aged 4 to 6 years) in Beijing Tongren Hospital from January 2020 to December 2022 were involved. Patients were further categorized by the refractive status after cycloplegia, including hyperopia, myopia, astigmatism, hyperopia with astigmatism, myopia with astigmatism, mild anisometropia and severe anisometropia. Quantitative measurements of best-corrected visual acuity (logMAR), stereoacuity (transformed to log units), perceptual eye position and interocular suppression were performed, and the differences between groups were analyzed. The rank sum test was used for statistical evaluation. Results: The average age of 45 ametropic amblyopia patients (21 males and 24 females) and 84 anisometropic amblyopia patients (48 males and 36 females) was 5.0 (4.0, 5.0) years and 5.0 (4.0, 6.0) years, respectively. The interocular differences in spherical equivalent [2.56 (1.50, 4.19) D vs. 0.25 (0.13, 0.56) D] and best-corrected visual acuity [0.40 (0.18, 0.70) logMAR vs. 0.07 (0.00, 0.12) logMAR] were larger in patients with anisometropic amblyopia than those with ametropic amblyopia. The anisometropic amblyopia patients had worse stereoacuity [2.60 (2.00, 2.90) log arcsec vs. 2.00 (2.00, 2.30) log arcsec] and deeper suppression [20.0% (13.3%, 40.0%) vs. 10.0% (0, 23.3%)], compared with the ametropic amblyopia patients. The differences were all statistically significant (P<0.05). The suppression and stereoacuity between patients with hyperopic anisometropic amblyopia [suppression, 30.0% (17.5%, 50.0%); stereoacuity, 2.90 (2.30, 2.90) log arcsec] and astigmatic anisometropic amblyopia [suppression, 10.0% (0, 20.0%); stereoacuity, 2.00 (2.00, 2.30) log arcsec] were significantly different (P<0.05). The differences of suppression and stereoacuity between patients with severe (binocular difference in spherical equivalent>2.50 D) [suppression, 30.0% (20.0%, 53.3%); stereoacuity, 2.90 (2.57, 2.90) log arcsec] and mild anisometropia [suppression, 20.0% (0, 30.0%); stereoacuity, 2.00 (2.00, 2.90) log arcsec] were also statistically significant (P<0.05). Conclusions: Patients with anisometropic amblyopia have deeper binocular suppression, worse stereoacuity and more severe binocular interaction abnormality than those with ametropic amblyopia. The severity of anisometropia affects the degree of the interaction abnormality.

Engineered endolysin of Klebsiella pneumoniae phage is a potent and broad-spectrum bactericidal agent against “ESKAPEE” pathogens

The rise of antimicrobial resistance in ESKAPEE pathogens poses significant clinical challenges, especially in polymicrobial infections. Bacteriophage-derived endolysins offer promise in combating this crisis, but face practical hurdles. Our study focuses on engineering endolysins from a Klebsiella pneumoniae phage, fusing them with ApoE23 and COG133 peptides. We assessed the resulting chimeric proteins’ bactericidal activity against ESKAPEE pathogens in vitro. ApoE23-Kp84B (CHU-1) reduced over 3 log units of CFU for A. baumannii, E. faecalis, K. pneumoniae within 1 h, while COG133-Kp84B (CHU-2) showed significant efficacy against S. aureus. COG133-L1-Kp84B, with a GS linker insertion in CHU-2, exhibited outstanding bactericidal activity against E. cloacae and P. aeruginosa. Scanning electron microscopy revealed alterations in bacterial morphology after treatment with engineered endolysins. Notably, CHU-1 demonstrated promising anti-biofilm and anti-persister cell activity against A. baumannii and E. faecalis but had limited efficacy in a bacteremia mouse model of their coinfection. Our findings advance the field of endolysin engineering, facilitating the customization of these proteins to target specific bacterial pathogens. This approach holds promise for the development of personalized therapies tailored to combat ESKAPEE infections effectively.

Spectral decomposition of ground motions in new zealand using the generalized inversion technique

Summary To gain new insights into ground-motion phenomena in New Zealand (NZ), we apply the non-parametric generalized inversion technique (GIT) in the Fourier domain to isolate the systematic source, path, and site effects from 20 813 seismograms, recorded by 693 sensors at 439 unique locations, from 1200 shallow crustal events (Mw &amp;gt; 3) during the period 2000–2021. From the inverted source spectra, we derive Brune's stress parameter, ∆σ, which is found to follow a lognormal distribution with a log10 standard deviation of 0.36 or equivalently 0.83 in natural log unit. ∆σ slightly increases with focal depth and is practically independent of earthquake size (i.e. self-similar), but displays a statistically significant spatial clustering. Based on the inverted attenuation, a trilinear geometric-spreading function, and a distance-dependent quality-factor Q(f) model are found to well describe the attenuation in NZ; though a single $Q( f )$ model is also obtained for the whole distance range: $Q( f ) = 149.1{f}^{0.62}$. Using the site response decomposed from GIT, we find that the soil classification scheme specified in NZ seismic code, NZS1170.5, has a limited capability in discerning the site-specific frequency-dependent amplification functions in comparison to a non-parametric clustering with the same number of discrete classes. The potential use of the spatial variation in source parameters from this GIT analysis in region-specific physics-based simulations is discussed.

Probabilistic Reference and 10% Effect Concentrations for Characterizing Inhalation Non-cancer and Developmental/Reproductive Effects for 2,160 Substances.

Chemicals assessment and management frameworks rely on regulatory toxicity values, which are based on points of departure (POD) identified following rigorous dose-response assessments. Yet, regulatory PODs and toxicity values for inhalation exposure (i.e., reference concentrations [RfCs]) are available for only ∼200 chemicals. To address this gap, we applied a workflow to determine surrogate inhalation route PODs and corresponding toxicity values, where regulatory assessments are lacking. We curated and selected inhalation in vivo data from the U.S. EPA's ToxValDB and adjusted reported effect values to chronic human equivalent benchmark concentrations (BMCh) following the WHO/IPCS framework. Using ToxValDB chemicals with existing PODs associated with regulatory toxicity values, we found that the 25th %-ile of a chemical's BMCh distribution () could serve as a suitable surrogate for regulatory PODs (Q2 ≥ 0.76, RSE ≤ 0.82 log10 units). We applied this approach to derive for 2,095 substances with general non-cancer toxicity effects and 638 substances with reproductive/developmental toxicity effects, yielding a total coverage of 2,160 substances. From these , we derived probabilistic RfCs and human population effect concentrations. With this work, we have expanded the number of chemicals with toxicity values available, thereby enabling a much broader coverage for inhalation risk and impact assessment.

Protecting the piglet gut microbiota against ETEC-mediated post-weaning diarrhoea using specific binding proteins

Post-weaning diarrhoea (PWD) in piglets presents a widespread problem in industrial pig production and is often caused by enterotoxigenic E. coli (ETEC) strains. Current solutions, such as antibiotics and medicinal zinc oxide, are unsustainable and are increasingly being prohibited, resulting in a dire need for novel solutions. Thus, in this study, we propose and evaluate a protein-based feed additive, comprising two bivalent heavy chain variable domain (VHH) constructs (VHH-(GGGGS)3-VHH, BL1.2 and BL2.2) as an alternative solution to manage PWD. We demonstrate in vitro that these constructs bind to ETEC toxins and fimbriae, whilst they do no affect bacterial growth rate. Furthermore, in a pig study, we show that oral administration of these constructs after ETEC challenge reduced ETEC proliferation when compared to challenged control piglets (1-2 log10 units difference in gene copies and bacterial count/g faeces across day 2–7) and resulted in week 1 enrichment of three bacterial families (Prevotellaceae (estimate: 1.12 ± 0.25, q = 0.0054), Lactobacillaceae (estimate: 2.86 ± 0.52, q = 0.0012), and Ruminococcaceae (estimate: 0.66 ± 0.18, q = 0.049)) within the gut microbiota that appeared later in challenged control piglets, thus pointing to an earlier transition towards a more mature gut microbiota. These data suggest that such VHH constructs may find utility in industrial pig production as a feed additive for tackling ETEC and reducing the risk of PWD in piglet populations.

Association of Contrast Sensitivity with Eye Disease and Vision-Related Quality of Life

To investigate contrast sensitivity (CS) as a screening tool to detect eye disease and assess its association with both eye disease and vision-related quality of life. Cross-sectional study METHODS: Setting & Population: Adults receiving care from a free clinic and a Federally Qualified Health Center in Michigan. Screening positive for eye disease and Visual Function Questionnaire (VFQ) score. Participants received a vision exam reviewed via telemedicine for disease, completed a demographic survey, and the 9-item VFQ. The ability of CS to predict eye disease was explored and area under the curve (AUC) is reported. Logistic and linear regression were used to investigate the continuous effect of CS on the probability of screening positive for eye disease and VFQ score, respectively, adjusting for age and visual acuity. 1159 participants were on average 54.9±14.5 years old, 62% female, 34% White, 54% Black, 10% Hispanic/Latino, and reported mean VFQ score of 79.7±15.3. CS ranged from 0.00-1.95 log units (mean=1.54±0.24), 21% of eyes had glaucoma, 19% cataract, 6% DR, and 2% AMD. AUCs ranged from 0.53 to 0.73. A 0.3 log unit decrease in better eye CS was associated with increased odds of glaucoma (Odds Ratio, OR=1.35, Confidence Interval, CI=1.09-1.67), cataract (OR=1.35, CI=1.05-1.72), DR (OR=2.05, CI=1.51-2.77), and AMD (OR=2.08, CI=1.10-3.91). A 0.3 log unit increase in better eye CS was associated with a 5.9 unit increase in VFQ. While CS alone is not sufficient to identify people with eye disease, it is an important measure of visual function that can add value to comprehensive eye screening.

The Redox State of the Asthenospheric Mantle and the Onset of Melting Beneath Mid‐Ocean Ridges

AbstractThe redox state of the convective asthenospheric mantle governs the speciation of volatile elements such as carbon and, therefore, influences the depth at which (redox) melting can occur, with implications for seismic signals. Geophysical observations suggest the potential presence of carbonatite melts at a depth of 200–250 km. However, thermodynamic models indicate that the onset of (redox) melting would occur at 100–150 km for a mantle with 3%–4% of Fe3+/∑Fe. Here, we present a new oxybarometer that is based on the V/Sc exchange coefficient between olivine and the melt, which is insensitive to surficial alteration, volatile degassing, electron exchange reactions and fractional crystallization. By applying this method to primary mid‐ocean ridge basalts (MORBs) from Southwest Indian Ridge and East Pacific Rise, we demonstrate that the average oxygen fugacity (fo2) of MORBs corrected for the depth of formation is 0.78 ± 0.26 (1σ) log units above the fayalite‐magnetite‐quartz (FMQ) buffer, which is slightly more oxidized than previously estimated (near FMQ buffer). Our findings indicate that the convective asthenospheric mantle exhibits higher oxygen fugacity than the continental lithospheric mantle. Along an adiabat, carbonatitic melts can form from a CO2‐bearing source at a depth of 200–250 km, explaining the asthenospheric mantle's electrical conductivity and seismic velocity anomaly.

Confirmed bacteriological diagnosis and cure of non-severe Gram-positive clinical mastitis cases enrolled in a randomized clinical trial based on results of on-farm culture

Our objectives were to describe the confirmed bacteriological diagnosis of mastitis pathogens cultured from cases of non-severe clinical mastitis (CM) identified as Gram-positive (GP) using on-farm culture and to compare differences in bacteriological cure (BC) based on antimicrobial (AM) therapy. Cows that developed non-severe CM in a single quarter were enrolled in a randomized clinical trial based on microbial growth on GP selective agars. Cows were randomly assigned to receive a once-daily intramammary treatment: 3d hetacillin (n = 69), 3d ceftiofur (n = 69), 8d ceftiofur (n = 70) or to a non-treated group (n = 32). Etiologies were confirmed with MALDI-TOF using frozen duplicate milk samples. The crude proportion of BC was determined using milk samples collected at 14, 21 and 28 d after enrollment for cases caused by Streptococci, non-aureus staphylococci (NAS), Strep-like organisms (consisting of Enterococcus and Lactococcus.; SLO) and Staph. aureus. Multivariable models were used to determine the effect of AM treatment on BC cure at d 21 for a subset of cases that had complete data for all covariates (n = 88). Growth on GP agar resulted in enrollment of 240 cases with confirmed etiologies distributed as Strep. spp (21.7%; n = 52), Lact. spp (19.2%; n = 46), NAS (16.3%; n = 39), Staph aureus (6.3%; n = 16), Entero spp (5.0%; n = 12) and others (10%; n = 24). Thirty-five (14.5%) duplicate milk samples collected from enrolled cows had no significant growth in the lab while 16 (6.7%) were contaminated. Among sampling dates, combined crude BC for cases caused by target pathogens ranged from 68 to 71%. Crude BC ranged from 58 to 73% for the small group of non-treated cases (n = 12) and 69–71% for the combined group of cases that received IMM AM (n = 113). Among all groups and all follow-up dates, crude BC was least for cases caused by Staph. aureus (ranging from 33 to 43%), followed by cases caused by SLO (58–67%), NAS (79–80%) and Strep. spp. (81–91%). The proportion of BC at 21d (LSM ± SE) did not vary between all cases that received AM (0.77 ± 0.06) and cases in the non-treated group (0.73 ± 0.16). The odds of BC at 21d was about 5x greater for cases that occurred in primiparous as compared with multiparous cows and decreased 1.3-fold for each 1 log unit increase in SCC before the case. While this study does not have sufficient power to detect small differences in BC among pathogen groups or treatments, our results demonstrate that CM is caused by a wide diversity of GP bacteria with varying ranges of BC. These results provide justification for inclusion of negative control groups in future studies and confirm that important characteristics such as parity and history of subclinical mastitis influence the probability of BC.

A COMPARISON OF PEAK WORK RATES DURING SUPER SHOT AND NON-SUPER SHOT PERIODS IN PROFESSIONAL NETBALL PLAYERS

BACKGROUND Since its introduction, the super shot has been a critical period of play in the Australian domestic netball competition. Depending on their shot selection strategy, teams can increase their odds of outscoring oppositions during super shot periods. As a result, players are likely to complete more attacking and defensive actions, possibly increasing their workload. The purpose of this study was to quantify workload and make comparisons between i) super shot and non-supershot periods and ii) different player positions. METHODS Raw acceleration data (VX sport Log units Visuellex New Zealand) from 11 players across 14 matches was collected and used to calculate PlayerLoadTM. Quarters were split into three five-minute periods and player position for each period was reported. Data was only included if a player competed for a full five-minute period (n=1110). A rolling average was applied over 60 seconds to compare peak PlayerLoadTM values between periods and positions. A linear mixed effects model was used to determine the effect of the period and position on peak 60s PlayerLoadTM. Random intercepts were included for player and game, quarter was included as a random effect within game. RESULTS During super shot periods, peak values were significantly lower for GS compared to regular periods (model coefficient = 0.8, 95%CI = 0.02 to 1.59, P = 0.04). During super shot periods, GD and GK positions showed slightly higher peak values compared to regular periods, with model coefficients of -0.05 (95%CI = -1.20 to 0.327) and -0.21 (95%CI = -1.00 to 0.57) respectively. On the other hand, GA, WA, WD, and C positions exhibited lower peak values for super shot periods compared to regular periods. Results indicate that there are differences in peak workloads between positions during super shot periods. CONCLUSION Workload demands may be different between positions during super shot periods, this has implications for player conditioning.

Ultraviolet-C Light and Peracetic Acid Extend the Shelf Life of Fresh and Frozen Strawberries

The postharvest life of strawberries is short, and disinfection processes for fresh-cut and frozen strawberries are needed to address the risk posed by foodborne pathogens in this kind of product. For this, a process involving immersion in a 40 mg L−1 peracetic acid (PA) solution accompanied by the use of an emerging technology, ultraviolet-C for 2 min, was studied for its impact on strawberry quality and microbial load as a novel alternative method to chlorine sanitation. The shelf life of the washed strawberries was evaluated in fresh (whole or fresh-cut) product for 11 days at 4 °C and in product that had been frozen for 12 months at –20 °C (air or modified atmosphere, 20% CO2, 5% O2, and 75% N2). After washing, total aerobic mesophylls, yeast, and mold decreased by 0.5–1.0 log units and these counts remained low during storage. The fresh and fresh-cut fruits’ firmness (2.3 ± 0.5 N at day 11) and lightness (expressed by L*, averaging 31.0 ± 0.1) were maintained. Although antioxidant activity, expressed by the amount of radical 2,2-diphenyl-1-picrylhydrazyl (DPPH), decreased during storage in fresh-cut samples, total ferric reducing antioxidant power (FRAP), total phenolic content, and total anthocyanin content were maintained in all the formats during storage (averaging 1.33 ± 0.04 g kg−1 ascorbic acid equivalents, 0.212 ± 0.01 g kg−1 gallic acid equivalents, and 0.03 ± 0.01 g kg−1 pelargonidine-3-glucoside). An increase in red color (from 32.1 to 39.3 a* values) and a loss of firmness of up to 46.8% was observed after the first month of frozen storage with no changes in the nutritional quality. Considering the sanitizing effect of water UV-C with peracetic acid (WUVPA) and the results obtained in the present study, the addition of this process in the production chain of strawberries could be an effective method to maintain the shelf life of the fruits, especially for fresh-cut strawberries.

Contrasting Tectonomagmatic Conditions for Coexisting Iron Oxide-Apatite Deposits and Porphyry and Skarn Cu ± Au Deposits in the Middle-Lower Yangtze River Metallogenic Belt, China

Abstract Porphyry Cu ± Mo ± Au and iron oxide-apatite (IOA) deposits rarely occur in spatial and temporal proximity in Phanerozoic arc-related settings, and the formation of these mineral deposit types in an evolving arc setting remains poorly understood. Specifically, the roles of magma composition and the tectonic regime remain the subject of some debate. Here, we systematically estimated the P-T-fO2 conditions and H2O-S-Cl contents for dioritic to granodioritic source magmas for porphyry and skarn Cu ± Au (150–135 Ma) and IOA deposits (~130 Ma) that formed in transpressional and transtensional settings in the Middle-Lower Yangtze River metallogenic belt, China. Our estimates show that, compared to IOA deposits, the porphyry- and skarn-related magmas were relatively felsic, cooler, and more hydrous. These geochemical features are consistent with the tectonic transition from subduction to slab rollback of the paleo-Pacific plate in the East Asia continental margin at &amp;lt;135 Ma and concomitant crustal extension and steepening of the regional geothermal gradient. Apatite data reveal that the silicate melts associated with the porphyry and skarn Cu ± Au and IOA deposits had comparable predegassed S concentrations (~0.13 ± 0.06 wt % vs. ~0.16 ± 0.09 wt % on average), but that IOA-related melts contained higher predegassed Cl/H2O ratios (~0.11 ± 0.03 vs. ~0.04 ± 0.03 for porphyry- and skarn-related magmas) that decreased by one order of magnitude after magmatic degassing. Magmatic fO2 estimated using zircon and amphibole, reported in log units relative to the fayalite-magnetite-quartz (FMQ) redox buffer, gradually increased during cooling of the porphyry- and skarn-related magmas (ΔFMQ +0.7 to +2.5) at 950° to 800°C and decreased to ΔFMQ +1 at 700°C owing to fractionation of Fe2+-rich minerals and subsequent S degassing, respectively. In contrast, the magmatic fO2 values for the IOA-related source magmas varied significantly from ΔFMQ –1.5 to ΔFMQ +2.5 but generally show an increasing trend with cooling from 970° to 700°C that probably resulted from variable degrees of evaporite assimilation, fractionation of Fe2+-rich minerals, and Cl degassing. These results are consistent with the hypothesis that Cl enrichment of the IOA-related source magmas played a determinant role in their formation. We propose that the porphyry and skarn Cu ± Au deposits in the Middle-Lower Yangtze River metallogenic belt formed in a transpressional setting in response to paleo-Pacific flat-slab subduction that favored storage and evolution of S-rich hydrous ore-forming magmas at variable crustal levels. A subsequent extensional setting formed due to slab rollback, leading to rapid degassing of Cl-rich IOA-related magmas. For the latter scenario, assimilation of evaporite by mafic to intermediate magmas would lead to an enrichment of Cl in the predegassed magmas and subsequent exsolution of hypersaline magmatic-hydrothermal fluid enriched in Fe as FeCl2. This Fe-rich ore fluid efficiently transported Fe to the apical parts of the magma bodies and overlying extensional normal faults where IOA mineralization was localized. The concomitant loss of S, H2O, and Cu with Cl by volcanic outgassing may have inhibited sulfide mineralization at lower temperatures.

Hazard warning modalities and timing thresholds for older drivers with impaired vision

PurposeWe examined collision warning systems with different modalities and timing thresholds, assessing their impact on responses to pedestrian hazards by drivers with impaired contrast sensitivity (ICS). MethodsSeventeen ICS (70–84 y, median CS 1.35 log units) and 17 normal vision (NV: 68–73 y, median CS 1.95) participants completed 6 city drives in a simulator with 3 bimodal warnings: visual-auditory, visual-directional-tactile, and visual-non-directional-tactile. Each modality had one drive with early and one with late warnings, triggered at 3.5 s and 2 s time-to-collision, respectively. ResultsICS participants triggered more early (43 vs 37 %) and late warnings (12 vs 6 %) than NV participants and had more collisions (3 vs 0 %). Early warnings reduced time to fixate hazards (late 1.9 vs early 1.2 s, p < 0.001), brake response times (2.8 vs 1.8 s, p < 0.001) and collision rates (1.2 vs 0.02 %). With late warnings, ICS participants took 0.7 s longer to brake than NV (p < 0.001) and had an 11 % collision rate (vs 0.7 % with early warnings). Non-directional-tactile warnings yielded the lowest collision rates for ICS participants (4 vs auditory 12 vs directional-tactile 15.2 %) in late warning scenarios. All ICS participants preferred early warnings. ConclusionsWhile early warnings improved hazard responses and reduced collisions for ICS participants, late warnings did not, resulting in high collision rates. In contrast, both early and late warnings were helpful for NV drivers. Non-directional-tactile warnings were the most effective in reducing collisions. The findings provide insights relevant to the development of hazard warnings tailored for drivers with impaired vision.

Nonlinear relationship between viral load and TCT in single/multiple HPV52 infection

PurposeTo determine the correlation between HPV (human papillomavirus) 52 viral load, multiple infections and ThinPrep cytology test (TCT), to inform clinical management of HPV52-positive women after cervical cancer screening.MethodsA total of 1,882 female patients who had positive quantitative HPV tests at Yuebei People's Hospital from January 2020 to December 2022, of whom 533 tested positive for HPV52. We excluded patients who combined HPV16 and/or HPV 18 positivity and whom HPV52 viral load could not be calculated. The final enrollment was 488 patients, including 400 NILM, 48 ASC-US, 28 LSIL and 12 HSIL. The HPV test is a quantitative multiplexed fluorescent PCR assay that provides both HPV genotyping and viral load.ResultsIn our study, there were differences in the median distribution of viral loads among various cytological class categories. The risk of TCT results (LSIL or worse) was increased with the increase of HPV52 viral load, for every LOG unit increase in HPV52 viral load, the risk increased by 26.6%. More importantly, we found a nonlinear relationship between HPV52 viral load and TCT results (LSIL or worse) in both single and multiple infections. When the viral load reaches a threshold, the risk of abnormal cytological results increases significantly.ConclusionHPV52 viral load is an independent risk factor for TCT results (LSIL or worse). The relationship between HPV52 viral load and TCT results (LSIL or worse) is not linear. Viral load may be used as a triage indicator for HPV52-positive patients, thus improving the post-screening clinical management of HPV52-positive women.

Fasting Triglycerides in the Upper Normal Range Are Independently Associated with an Increased Risk of Diabetes Mortality in a Large Representative US Population.

The association between normal-range triglyceride levels and diabetes mortality remains unclear. This cohort study aimed to elucidate this relationship by examining 19,010 US adult participants with fasting serum triglycerides below 150 mg/dL. Cox proportional hazards models were employed to estimate mortality hazard ratios (HRs) and 95% confidence intervals (CIs). Participants were followed up for a mean of 15.3 years, during which 342 diabetes deaths were recorded. A 1 natural log unit increase in triglycerides was associated with a 57% higher risk of diabetes mortality (adjusted HR, 1.57; 95% CI, 1.04-2.38). Comparable results were obtained when triglycerides were analyzed in quartiles. Receiver operating characteristic curve analysis identified an optimal triglyceride cutoff of 94.5 mg/dL for diabetes mortality; individuals with triglyceride levels above this threshold faced a greater risk of diabetes mortality (adjusted HR, 1.43; 95% CI, 1.12-1.83). Further investigation revealed a positive association between normal triglyceride levels and all-cause mortality, though no association was observed between normal triglycerides and mortality from hypertension or cardiovascular disease. In conclusion, elevated triglyceride levels within the normal range were associated with an increased risk of diabetes mortality. Individuals with triglyceride levels of 95 mg/dL or higher may require vigilant monitoring for diabetes and its associated complications.

The synergistic bactericidal effect of simultaneous 222 nm krypton-chlorine excilamp and 307 nm UVB light treatment on sliced cheese and its mechanisms

In this study, we investigated the combined effect of 222 nm krypton-chlorine excilamp (EX) and 307 nm ultraviolet-B (UVB) light on the inactivation of Salmonella Typhimurium and Listeria monocytogenes on sliced cheese. The data confirmed that simultaneous exposure to EX and UVB irradiation for 80 s reduced S. Typhimurium and L. monocytogenes population by 3.50 and 3.20 log CFU/g, respectively, on sliced cheese. The synergistic cell count reductions in S. Typhimurium and L. monocytogenes in the combined treatment group were 0.88 and 0.59 log units, respectively. The inactivation mechanism underlying the EX and UVB combination treatment was evaluated using fluorescent staining. The combination of EX and UVB light induced the inactivation of reactive oxygen species (ROS) defense enzymes (superoxide dismutase) and synergistic ROS generation, resulting in synergistic lipid peroxidation and destruction of the cell membrane. There were no significant (P > 0.05) differences in the color, texture, or sensory attributes of sliced cheese between the combination treatment and control groups. These results demonstrate that combined treatment with EX and UVB light is a potential alternative strategy for inactivating foodborne pathogens in dairy products without affecting their quality.

A novel strategy for norovirus removal from wastewater based on bacterial-viral interactions

Norovirus is the main pathogen of acute gastroenteritis worldwide. It is highly resistant to the environment. The virus is not effectively inactivated by either UV or chlorine disinfection. Sewage is one of the sources of the spread of norovirus epidemic. This study delved into the capacities and mechanisms employed by Sphingobacterium multivorum in the removal of Norovirus from wastewater. The adsorption process was optimised by response surface method, and adsorption effects were explored by transmission electron microscopy, analysis of monosaccharide, molecular docking. A reduction of 2.42 log units of norovirus in simulated wastewater was facilitated by S S. multivorum. The optimal adsorption performance by S. multivorum was observed under conditions of a pH value of 8.4, a temperature of 25 °C, and a duration of 1.3 h. The effector molecule for norovirus adsorption by S. multivorum was located in the bacterial EPS. The effector molecule is a class of substances with structural similarities to human type A, B and Lewis A histo-blood group antigens, and its monosaccharide component is mainly fucose. The results of molecular interaction docking simulations showed that fucose was able to form hydrogen bonding interactions with amino acids in the norovirus P protein. Norovirus-bacteria interactions provide methods for wastewater norovirus removal and new strategies for other virus removal processes.

The Olivine-Spinel-aSiO2melt (OSaS) Oxybarometer: A New Method for Evaluating Magmatic Oxygen Fugacity in Olivine-Phyric Basalts

Abstract The compositions of cotectic olivine-spinel pairs in mafic magmas provide information on the oxygen fugacity of their host liquid, which can be accessed with a thermodynamic analysis of the olivine-spinel-liquid peritectic reaction: 3 F e 2 S i O 4 o l i v + O 2 s y s = 2 F e 3 O 4 s p + 3 S i O 2 m e l t The extraction of redox information from cotectic olivine-spinel pairs requires a well-defined silica activity value (aSiO2melt) for the melt of interest, as well as a method to calculate aFe2SiO4oliv and aFe3O4sp from chemical analyses of olivine and spinel, respectively. In this work, we develop a new olivine-spinel-aSiO2melt (OSaS) oxygen barometer that utilizes MELTS to obtain values of aSiO2melt, which are used with values aFe2SiO4oliv and aFe3O4sp determined from established solution models for olivine and spinel. We find that two implementations of the spinel-liquid peritectic equilibria can successfully generate magmatic oxygen fugacity values, (1) using a combination of mineral activity models from the literature (classical-OSaS) and aSiO2melt determined from MELTS, and (2) directly from chemical potentials obtained from MELTS, where a correction is added to the MELTS-derived chemical potentials for the magnetite component of the spinel (MELTS-OSaS). The two implementations of the OSaS were tested by using each model to recover the experimentally reported fO2 values for a dataset consisting of 50 olivine-spinel-glass assemblages derived from 14 published experimental studies. This dataset was filtered to remove potential disequilibrium phase assemblages, experiments with failed redox buffers, and poor-quality EMP analyses. Data quality metrics for the dataset filtration included Fe-Mg partitioning between olivine and melt, Fe-Mg partitioning between olivine-spinel, and an examination of whether aSiO2melt values were consistent with the reported phase assemblages. The classical-OSaS implementations reproduced the fO2 values reported from the experimental dataset with a standard error estimate (SEE) of ±0.39, root mean standard error (RMSE) of ±0.40 and average deviation of ±0.31. In testing the MELTS-OSaS model, we identified that the solution model for magnetite underpredicted the values of aFe3O4sp; therefore, we used the 50 experiments to assign a correction to the MELTS-predicted chemical potentials of magnetite. We tested 35 the MELTS-OSaS model with the magnetite correction on a dataset of 18 additional buffered experiments, filtered for redox equilibrium and not included in the original experimental dataset. We find that the MELTs-OSaS model, which includes the correction for the magnetite chemical potential, reproduces fO2 values for the 18 experiments with an SEE of ±0.20, root mean standard error (RMSE) of ±0.23 and average deviation of ±0.18. The OSaS oxybarometer can return magmatic fO2 values with a standard error of ± 0.20 to 0.39 log units, depending on the model selected, provided that the olivine-spinel cotectic temperature is known to an accuracy of ±25°C, the H2O content of the melt can be estimated within ±1.5wt%, and that the crystallization pressure of the olivine-spinel pair is &amp;lt; 500 MPa. We also propose that the OSaS models can be applied to experimental run products to determine or confirm oxygen fugacity values. We additionally suggest that the careful application of the OSaS oxybarometer can provide a reliable and robust alternative for performing redox studies on samples that do not contain sufficient glassy material to support the application of spectroscopic techniques (i.e., XANES and Mössbauer).

Redox control of the partitioning of platinum and palladium into magmatic sulfide liquids

The partitioning behavior of platinum group elements in magmas is critical for their use as tracers of planetary accretion and in understanding magmatic sulfide deposits. Here we use laboratory experiments to determine sulfide liquid–silicate melt partition coefficients for platinum and palladium at 1.5 GPa, 1400 °C, and oxygen fugacity 1.5–2 log units above the fayalite–magnetite–quartz buffer. We find that the partitioning coefficients of these elements are 2.3 × 105 to 1.1 × 106 and are independent of the platinum and palladium concentration in the system. Combined with previous data obtained at oxygen fugacity below the fayalite–magnetite–quartz buffer, this indicates redox-controlled partitioning behavior whereby at oxidizing conditions platinum- and palladium-enrichments are achieved through their dissolution in sulfide liquids, while at reducing conditions the entrapment of platinum- and palladium-rich clusters in sulfide liquids is more critical. This redox-controlled partitioning behavior should be considered when studying crust–mantle differentiation and the formation of magmatic sulfide deposits.

Quality of vision clinical outcomes for a new fully-refractive extended depth of focus Intraocular Lens.

To evaluate the visual performance of a purely refractive extended depth of focus (EDF) intraocular lens (IOL). A prospective, multi-center, randomized, subject/evaluator-masked study. Subjects were bilaterally implanted with the EDF test (Model ZEN00V, N = 60) or an enhanced monofocal control (Model ICB00, N = 57) IOL. Monocular corrected distance (CDVA), intermediate (DCIVA), near acuities (DCNVA) and patient reported visual symptoms were evaluated at the 6-month visit. Monocular mesopic contrast sensitivity (CS) and depth of focus (DOF) testing were assessed at 3 months. CDVA (Mean ± SD) was -0.06 ± 0.08 for test and -0.05 ± 0.08 logMAR for control groups. DCIVA was 0.13 ± 0.08 for test and 0.18 ± 0.14 logMAR for control groups (p = 0.0127). DCNVA was 0.37 ± 0.10 for test and 0.43 ± 0.16 logMAR for control groups (p = 0.0137). Test lens was statistically superior for intermediate and near. Overall, 91.7% (halos), 95.0% (starbursts) and 95.0% (glare) of test lens patients reported that they did not experience, were not bothered, or were slightly bothered by specific visual symptoms, compared to 98.2%, 100% and 96.5% in the control group. The DOF range over which monocular visual acuity was 0.20 logMAR or better was -1.6 D for the test lens. Mesopic CS was comparable between both groups, falling within 0.11 log units for all measured cycles per degree with and without glare. The EDF IOL demonstrated extended range of vision and statistically superior intermediate and near performance compared to the monofocal IOL. Distance visual acuity, contrast sensitivity and dysphotopsia profile were similar to the monofocal IOL.

Ongoing Laboratory Performance Study on Chemical Analysis of Hydrophobic and Hydrophilic Compounds in Three Aquatic Passive Samplers.

The quality of chemical analysis is an important aspect of passive sampling-based environmental assessments. The present study reports on a proficiency testing program for the chemical analysis of hydrophobic organic compounds in silicone and low-density polyethylene (LDPE) passive samplers and hydrophilic compounds in polar organic chemical integrative samplers. The median between-laboratory coefficients of variation (CVs) of hydrophobic compound concentrations in the polymer phase were 33% (silicone) and 38% (LDPE), similar to the CVs obtained in four earlier rounds of this program. The median CV over all rounds was 32%. Much higher variabilities were observed for hydrophilic compound concentrations in the sorbent: 50% for the untransformed data and a factor of 1.6 after log transformation. Limiting the data to the best performing laboratories did not result in less variability. Data quality for hydrophilic compounds was only weakly related to the use of structurally identical internal standards and was unrelated to the choice of extraction solvent and extraction time. Standard deviations of the aqueous concentration estimates for hydrophobic compound sampling by the best performing laboratories were 0.21 log units for silicone and 0.27 log units for LDPE (factors of 1.6 to 1.9). The implications are that proficiency testing programs may give more realistic estimates of uncertainties in chemical analysis than within-laboratory quality control programs and that these high uncertainties should be taken into account in environmental assessments.